The Factory Five Challenge Cobra replica race car is meant for those that intend to race the car in either the FFR race series or other events. No frills required but plenty of grunt and great handling.
Construction
Layout : Front engined rear wheel drive roadster
Frame : Tubular space frame with integral backbone
Roll Cage : NASA Approved 1.5 in DOM tubing
Sub-Structure : Aluminium panelling, riveted and bonded to frame
Restraint System : 5 Point Simpson Full Harness
Engine
Configuration : Choice of 5.0 litre or 5.8 litre “small block” Ford V8 or 7 litre “large block” Ford V8 or 4.6 litre Dual Overhead Cam 32v Ford V8
Induction : Carburettor or Multi Port Fuel Injection
Horsepower : 225 bhp to 500 bhp, typically
Torque : 175 ft lbs to 550 ft lbs, typically
Drivetrain
Gearbox : 5 speed manual transmission
Rear Axle : 3.55 : 1, Limited Slip
Clutch : 10.5” (267 mm), Single Disc
Suspension
Front suspension type : Independent unequal length A-arms, adjustable
Rear suspension type : Solid Rear Axle 3 link with Panhard Bar
Springs/Dampers : Koni coil-over, with ride height adjustment
Steering : Manual rack & pinion, 2.6 turns lock to lock
Brakes : 11” (279 mm) front discs, 10.5” (267 mm) rear discs
Wheels : Pin drive or bolt on, 17” x 10.5” rear, 17” x 8.5” front, typically
Tyres : 285 x 17” rear, 245 x 17” front, typically
Dimensions
Weight : 2250 lbs (1021 kg), typically,
Weight Distribution : 46% front / 54% rear
Wheelbase : 90” (2286 mm)
Overall Length : 158” (4013 mm)
Front Track : 56” (1422 mm)
Rear Track : 58.5” (1486 mm)
Overall Height : 47” (1194 mm)
Overall Width : 72” (1829 mm)
Ground Clearance : 4.5” (114 mm)
Fuel Capacity : 12.5 gallons (57 litres)
|